manualshive.com logo in svg

Pericom Software Compaq t5300, User Manual, Page: 224 / 342

Share
Download
Pericom Software Compaq t5300 User Manual Download Page 224

15-10

Initialization Commands

Window Title

Registry Entry:

None

Command Line: -T"title"

Default Setting: Emulator name

This enables you to specify the title that is to be displayed in the title bar. This is useful
when you are running more than one instance of the emulator. If no title is specified
then the name of your version of the emulator will be displayed.

Window Subtitle

Registry Entry:

None

Command Line: -ST"subtitle"

Default Setting: Untitled

This enables you to specify a subtitle for display in the title bar of a specific emulator
window. By default the subtitle is the name of the session.

Disable Title  Bar

Registry Entry:

None

Command Line: -TB

Default Setting: on

This command is only available for NT or XP embedded versions of the emulator. It
will remove the title bar from the window.

Disable Min/Maximize & Close Buttons

Registry Entry:

None

Command Line: -SY

Default Setting: on

This will remove the Control (System) menu icon and the minimize and maximize
buttons from the emulator window.

Summary of Contents for Compaq t5300























































































































































































































































































































































Reviews:

No comments