manualshive.com logo in svg

Pericom Software Compaq t5300, User Manual, Page: 223 / 342

Share
Download
Pericom Software Compaq t5300 User Manual Download Page 223

15-9

Initialization Commands

Display

Window Minimized On Start-Up

Registry Entry:

WindowSize = "minimized"

Command Line: -MI

Default Setting: Not applicable

These commands are only available for NT or XP embedded versions of the emulator.
They will cause the window to be displayed as an icon when the emulator is loaded.

Window Maximized On Start-Up

Registry Entry:

WindowSize = "maximized"

Command Line: -MA

Default Setting: Not applicable

These commands are only available for NT or XP embedded versions of the emulator.
They will cause the window to be displayed at the maximum size possible when the
emulator is loaded, while retaining the default number of lines and columns and
including all window elements if enabled (title bar, soft buttons etc.).

Workspace Fills Screen On Start-Up

Registry Entry:

WindowSize = "FullScreen"

Command Line: -F

Default Setting: Not applicable

These commands are only available for NT or XP embedded versions of the emulator.
They will cause the emulation workspace to fill the entire display when the emulator is
loaded, while retaining the default number of lines and columns.

Disable Window Frame Resize

Registry Entry:

None

Command Line: -WF

Default Setting: Enabled

This command is only available for NT or XP embedded versions of the emulator. It
prevents the mouse from resizing the window by dragging the edge.

Summary of Contents for Compaq t5300























































































































































































































































































































































Reviews:

No comments