Performance Spin Doctor Instructions For Use Download Page 4

Page: 4 / 4

CLAMP MECHANISM ORIENTATION

ADJUSTMENT

1. Release the clamp rotation fixing system by

pulling the lever (L) upwards (fig.10). Turn the

clamp disc (N) to the required position (fig.11).

Push the lever (L) back down to its initial

position to lock the mechanism again (fig.12).

BICYCLE CLAMPING

1. Open the clamp mechanism by pulling the

lever

(L) upwards (fig.13).

2. If the opening of the clamp jaws, dimension

“X”, is not enough to insert the required part of

the bicycle, turn the handwheel (R) clockwise

to increase dimension X or counterclockwise to

decrease dimension X (fig.14).

3. Secure the bicycle (fig.15).

4. Close the clamp by pushing the lever (L) downwards (fig.16).

5. Fine adjustment of clamping pressure is possible by turning the handwheel (R)

(fig.17)

Turn clockwise to tighten the grip.

Turn counterclockwise to decrease the grip.

6. It is now possible to proceed with bicycle maintenance.

BICYCLE REMOVAL

1. Open the clamp jaws by pulling the lever (L) upwards (fig.18).

2. Remove the bicycle (fig.19).

Summary of Contents for Spin Doctor

Page 3: ... fig 8 secure the top tube by turning the handle clockwise G fig 9 9 8 7 FOLDING THE WORKSTAND 1 Pull the safety slider I and keeping it in the release position fig 20 flip the clamp mechanism M upwards fig 21 2 Unscrew the clamping handle G fig 22 lowering the top tube H fig 23 Secure the top tube by turning the handle G fig 24 22 20 21 23 24 ...