14
Not RDY(NOT READY)
– indicates that a particular monitor being
checked has not completed its diagnostic testing
N/A
– the monitor is not supported on that vehicle
→
– a flashing Right Arrow indicates additional information is available
on the next screen
←
– a flashing Left Arrow indicates additional information is available
on the previous screen
1. Select
“3. I/M” from the main menu by pressing the ENTER button.
If the Scan Tool is not connected yet, then refer to
“Read
Co
des”
from 1 to 6.
2. Use the
SCROLL
button to view the status of the
MIL
light (
ON
or
OFF
)
and the following monitors
MISFIRE
– Misfire monitor
FUEL
– Fuel System Monitor
CCM
– Comprehensive Components Monitor
CAT
– Catalyst Monitor
HCM
– Heated Catalyst Monitor
EVAP
– Evaporative System Monitor
2AIR
– Secondary Air Monitor
A/C
– A/C system Monitor
O2S
– O2 Sensors Monitor
HO2S
– O2 Sensor Heater Monitor
EGR
– EGR System Monitor
3. Press the
ENTER
button to return to the main Menu.
View VIN Number
The View VIN function allows you to retrieve the Vehicle Identification No.
on 2002 and newer vehicles that support Mode 9.
1. Select
“
4. VIN
” from the main menu by pressing the
ENTER
button.
