Performance Tool M673 Owner'S Manual Download Page 12

1 YEAR LIMITED WARRANTY

PERFORMANCE TOOL® extends only the following warranties, and only to original retail 

purchasers. These warranties give specific legal rights. Except where prohibited by local law, the 

law of the State of Washington governs all warranties and all exclusions and limitations of 

warranties and remedies. There may be other rights which vary from state to state. 

PERFORMANCE TOOL® warrants the product to be free from defects in materials and 

workmanship under normal use and service. A defective product may be returned for a free 

replacement within 90 days from the date of purchase, provided that product is returned to place 

of purchase immediately after discovery of defect. After 90 days and up to one year from date of 

purchase, PERFORMANCE TOOL® will replace at no charge any parts which our examination 

shall disclose to be defective and under warranty. These warranties shall be valid only when a 

sales receipt showing the date of purchase accompanies the defective product or defective part(s) 

being returned. For part(s) after 90 days, please remit your request, postage prepaid to: 

PERFORMANCE TOOL, P.O. Box 88259 Tukwila, WA 98138 

These warranties exclude blades, bits, punches, dies, bulbs, fuses, hoses, and other 

consumables which must be replaced under normal use and service. These warranties shall not 

apply to any product or part which is used for a purpose for which it is not designed, or which has 

been repaired or altered in any way so as to affect adversely its performance or reliability, nor 

shall these warranties apply to any product or part which has been subject to misuse, neglect, 

accident or wear and tear incident to normal use and service. PERFORMANCE TOOL® does not 

authorize any other person to make any warranty or to assume any liability in connection with its 

products. Except for warranties of title and the limited express warranties set forth above, 

PERFORMANCE TOOL® makes no express or implied warranties of any kind with respect to its 

products. In particular, PERFORMANCE TOOL® makes no implied warranty of merchantability 

and no implied warranty of fitness for any particular purpose, except that for goods purchased 

primarily for personal, family or household use and not for commercial or business use, 

PERFORMANCE TOOL® makes an implied warranty of merchantability (and, if otherwise 

applicable, an implied warranty of fitness for a particular purpose), but only for the particular 

qualities or characteristics, and for the duration, expressly warranted above. The laws on 

limitation of implied warranties may differ from state to state, so the above limitations may not 

apply in all cases. PERFORMANCE TOOL® shall not be liable for consequential, incidental or 

special damages resulting from or in any manner related to any product, or to the design, use, or 

any inability to use the product. The sole and exclusive remedy for a defective product or part 

shall be the repair, or replacement thereof as provided above. The laws on limitation of remedies 

or on consequential, incidental or special damages may vary from state to state, so the above 

limitations may not apply in all cases.

© Copyright 2017 WILMAR CORPORATION,  P.O. Box  88259 Tukwila, WA 98138 

Summary of Contents for M673













Reviews: