DK58113 Developer Kit User Manual
41
3
3.Electrical Reference
In This Chapter
User-Settable Components
Connectors
Motor Connection Quick Reference
Absolute Maximum Ratings
Environmental and Electrical Ratings
DK58113 On-Board Amplifier Quick Reference
3.1
User-Settable Components
The following table details the available DK58113 jumper settings, which are the DK58113’s only user-settable hard-
ware components:
Jumper ID
Factory Default
Setting
Setting & Description
JP1, JP2
1-2 (on-card amplifier)
1-2
Installing jumpers at 1-2 for JP1 and JP2 configures the
DK58113 for operation of the on-card amplifier.
2-3
Installing jumpers at 2-3 for JP1 and JP2 disables the on-
card amplifier, and configures the DK58113 for operation
with a user-designed amplifier via the J12 Remote
Amplifier Connector, or with an Atlas DK amplifier via
the J10 connector.
JP4
1-2 (RS-232)
1-2
Installing a jumper at 1-2 for JP4 configures the DK58113
for RS-232 serial operation.
2-3
Installing a jumper at 2-3 for JP4 configures the DK58113
for RS-485 serial operation.
