manualshive.com logo in svg

Performance Health Core:Tx, User Manual

Share
Download
Performance Health Core:Tx User Manual Download Page 72

62

Core:Tx User Guide

 

•

Use progressive increases in calibrated range in Monitor Mode 
to emphasize increased ROM. Begin by having patients work in 
their comfortable range, then recalibrate and repeat the activity 
with slightly larger ROM. 

•

Increase Challenge Mode speed to 5 to have the patient work 
on neuromuscular training through a larger ROM.

Shoulder Internal/External in 
Abducted Position

Purpose of Exercise:

 To promote neuromuscular control of the 

rotator cuff. This exercise activates the rotator cuff in a more 
challenging position of abduction.

Preparation/Positioning:

 The patient may be seated or standing. 

Apply the Core:Tx transceiver to the patient’s distal forearm, as 
shown above, with a dark gray strap. Instruct the patient in the 
desired position and movement and set up the activity as shown 
below.

Summary of Contents for Core:Tx





























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands