16. With the utility cart still upside down, insert the
smaller end of the caster holders into the hollow
ends of the handles. (NOTE: If necessary, use a
rubber or plastic mallet to seat holders into
handles completely.)
17. Attach the locking casters to one end of the cart
by inserting the pins on the caster into the castor
holders. (NOTE: If necessary, use a rubber or
plastic mallet to seat casters into the caster
holders completely.)
18. Repeat step 9 with the non-locking castors on
the other end of the cart.
19. Carefully flip the cart back to its up-right position.
20.Slide drawer into open area at front of utility cart.
(NOTE: While attaching drawer, insure that the
rails on the sides of the drawer are inserted into
the drawer support rails located on the inside of
the side brackets (8). If the drawer will not slide
into the side bracket rails, the side brackets may
have been installed upside down. Refer to
step10.)
LOCKING DRAWER:
To lock drawer:
1.Close drawer completely.
2.Insert key (12) into keyhole and turn 90°
counter clockwise.
3.Remove key and pull on drawer handle to
make sure lock is engaged.
To unlock drawer:
1.Insert key into keyhole and turn 90° clockwise.
2. Remove key and pull drawer open.
3. Store key safely.
