7
EJECTOR PUMP DRAINAGE
TO USE THE PUMP DRAINING OPTION
INSTALLATION:
1. Attach the pump hose adapter to the 16 ft. clear hose
(both included with the unit).
2. Connect the pump drainage adapter (#1 in the
diagram) to the drain hole located on the bottom left
back of the unit (#2 in the diagram).
3. When unit’s internal tray capacity reaches the
pre-determined water level, the unit will
pump automatically.
DISASSEMBLY:
1. Press and hold the ribbed circle found above the
adapter (#3 in diagram) on the unit.
2. The continuous drainage adapter will release.
3. Gently pull the adapter with the holes away from the
unit while continuing to press on the ribbed circle.
4. Rinse the hose and the adapter by running water
through both before storing in a safe place.
3
2
1
NOTE:
Hose may be cut shorter if needed
depending on draining distance.
Summary of Contents for 1PEDP50
Page 4: ......
