LEDA84NW
V. 05 – 16/05/2017
6
©Velleman nv
Remarks
Adjust the sensitivity to your needs, but remember that even the slightest movement from near
persons or objects can trigger the sensor. Lower the sensitivity if the lamp switches on
unintentionally.
7.2
Installation
Refer to the illustration on page 3 of this manual.
Remarks
Install the lamp away from curtains, trees and other moving objects.
Install the lamp away from high temperature or humidity.
Always cut off the power before installation.
When installing two or more lamps, keep them at least 4 m apart.
8.
Cleaning and Maintenance
This lamp does not need any particular maintenance.
Occasionally wipe the lamp with a damp cloth. Do not use harsh chemicals, cleaning solvents or
strong detergents.
9.
Technical Specifications
electrical data
power LED module
72 x 2835 LEDs
total nominal power
10 W
nominal voltage driver
230 VAC
power factor
> 0.5
energy consumption (kWh/1000 h)
10
relay output
max. 200 W
light technical data
colour
neutral white
colour temperature
4000 K
beam angle
120°
luminous flux
550 lm
colour rendering index
> 80
starting time
< 0.5 s
warm-up time (60 %)
< 1 s
lifespan
nominal life time
20.000 h
number of switching cycles
10.000
dimensions LED module
Ø 281 x 103 mm
weight
1015 g
motion sensor
detection range
2 m, 6 m or 14 m (diameter) adjustable
frequency
5.8 GHz
Use this device with original accessories only. Velleman nv cannot be held responsible in the
event of damage or injury resulting from (incorrect) use of this device. For more info
concerning this product and the latest version of this manual, please visit our website
www.perel.eu. The information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved.
No part
of this manual may be copied, reproduced, translated or reduced to any electronic medium or otherwise
without the prior written consent of the copyright holder.
