EWL413/EWL415
V. 01 – 18/06/2015
4
©Velleman nv
4.
Features
handle with soft-grip foam protection
CLASS 2 design
high-performance SMD LEDs
suited for outdoor use (IP54)
power cord length: 5 m
5.
Overview
Refer to the illustrations on page 2 of this manual.
1
protective glass
3
bracket fixing knob
2
handle
4
power cord
6.
Operation
General Use
1.
Place your work light on a flat and stable surface.
2.
Insert the power plug into the mains to switch it on.
3.
Switch off after use by pulling the plug from the mains.
Mounting bracket
1.
Slightly loosen the fixing knob.
2.
Adjust the mounting bracket as desired.
3.
Re-tighten the fixing knob.
7.
Cleaning and Maintenance
All screws should be tight and free of corrosion.
The housing, the visible parts, the mounting supports and the installation location (e.g. ceiling,
suspension, trussing) should not be deformed, modified or tampered with; e.g. do not drill extra
holes in mounting supports, do not change the location of the connections…
Mechanically moving parts must not show any signs of wear and tear.
If the protective glass is damaged, have it repaired immediately by a qualified technician. Do not use
the lamp with a cracked or broken protective glass.
Wipe the device regularly with a moist, lint-free cloth. Do not use alcohol or solvents.
There are no user-serviceable parts.
Contact your dealer for spare parts if necessary.
8.
Technical Specifications
EWL413
EWL415
electrical data
total nominal power
< 30 W
< 50 W
nominal voltage driver
220-240 VAC, 50/60 Hz
power factor
> 0.9
energy consumption
30 kWh/1000 h
50 kWh/1000 h
light technical data
colour
neutral white
colour temperature
4000 K
beam angle
120°
luminous flux
2300 lm
4000 lm
colour rendering index
> 70
starting time
< 0.5 s
warm-up time (60 %)
< 2 s
