Instrument
Components:
KS1,KS2
KS2 - 850mm
Ground Surface
KS1 - 700mm
Installation Instructions
14 Kg
4. Once all mounts are fixed
in place attach the notes
using M8 Barrel Nuts and Pin
torx bit.
1. Mark hole positions on wall,
then drill to manufacturers
specified diameter and depth
of M10 rawl bolt (See Wall Fix
installation sheet)
2. Once holes are drilled
insert M10 rawl bolts into
holes and set in place to
secure tightly
3. Attach wall mounts onto
rawl bolts making sure they
are tight to the wall and have
the large holes to the outside.
Use a long tool to tighten
further.
1m
Pair Small Red
Beaters X1
Weight of heaviest part
12
kg
(Wall Marimba Notes)
BS EN 1176
Wall Fixed
M8 Barrel Nut
x4
Wall mounts
x4
1m
1m
Install Instrument with 1m free space (from widest point) around it.
Wall Marimba
Page 1 of 3
Wall fixings are not supplied, installer will select suitable
method of fixing. Suggested Fixing M10 Rawl Bolt
Metric Conversion:
700mm/ 28”
850mm/ 33”
1m/ 39”
Spares available from
percussionplay.com
or from your
local distributor
