Assembly & Operation Manual
14. Check the reliability of electromechanical barrier arm unblocking device by turnstile
power on / off. If necessary, lubricate the hinged connections to the hub (5).
15. Check the reliability of the turnstile housing fastening to the floor and if necessary,
tighten the anchor bolts (15) with S17 socket wrench. Before it is necessary to
remove plastic plugs (16) out of the holes in the turnstile housing base.
In case of any defects revealed during visual check please apply to the PERCo Technical
Support Department (the PERCo TSD).
Figure 14. Location of the interior components of the turnstile mechanism
11 TRANSPORTATION AND STORAGE
The turnstile in the original package should be transported in closed freight containers or in
other closed type cargo transport units. During storage and transportation, the boxes can
be stacked no more than 4 layers high.
The storage of the turnstile is allowed indoors at ambient temperature from –40°C to
+55°C and at relative air humidity up to 98% at +25°C.
After transportation or storage at temperatures below zero or at high air humidity, prior to
the installation the turnstile must be kept in the original package for no less than 24 hours
indoors at room temperature.
28
Summary of Contents for TTR-08A
Page 34: ...www perco com...
