PERCo TTD-08A, Assembly And Operation Manual

Page: 4 / 38

TTD-08A Electromechanical Box Tripod Turnstile
3
Dear Customer,
Thank you for purchasing the PERCo turnstile. Please follow the instructions
given in the Manual carefully, and this quality product will provide many years
of trouble-free use.
Assembly and Operation Manual (hereinafter - the Manual) for the TTD-08A
electromechanical tripod turnstile with automatic anti-panic folding arms contains
data that is necessary for the most full use of operating advantages of the turnstile as well
as chapters on packaging, installation and maintenance.
Only qualified personnel, following the instructions of this Manual, must carry out
installation and maintenance
Abbreviations:
•
ACS — access control system;
•
RC panel – remote control panel;
•
WRC – wireless control panel;
•
CLB – control logic board.
1 APPLICATION
The TTD-08A electromechanical box tripod turnstile with automatic anti-panic folding arms
(hereinafter - the turnstile) is designed for managing pedestrian flows at entrance points of
industrial facilities, banks, administrative buildings, retail outlets, railway terminals, airports
providing free passageway in emergency situations. Housing of the turnstile is made of
stainless steel. Outdoor application is allowed.
To ensure fast and convenient passage it is recommended to install one turnstile per 500
people working the same shift, and on the basis of maximum working load
30 persons / min See Chapter 3 for information on the throughput capacity of the turnstile.
2 OPERAT I ON CONDITIONS
The turnstile with regard to resistance to environmental exposure complies with
GOST15150-69, category N1 (for an outdoor application).
Operation of the turnstile is allowed at ambient air temperature from –20°C to +45°C
(when used under the canopy – to + 55°C) and at relative air humidity of up to 80% at
+25°C.