TTD-03.2 Electromechanical Box Tripod Turnstile
19
Table 2. Pulse control mode (the jumper is set on the connector J1)
№
The
turnstile
operating
modes
Actions to do Indication on the
RC-
panel
Indication on the
turnstile housing
display
Response
to the barrier arm
turning
1 Always
locked
Press the
STOP
button on the
RC-panel
The red indicator
above the
STOP
button is on
The two “Red cross”
pictograms (left and
right) are on
2
Single
passage in
the set
direction
Press the button
on the RC-panel
corresponding to
the chosen
passage
direction
The green
indicator above
the button of the
chosen passage
direction is on
The “Green arrow”
pictogram, showing
the passage
direction, and the
“Red cross”
pictogram from the
opposite side are on
Turnstile gets blocked
3
Bidirectional
single
passage
Press both the
left and right
side buttons on
the RC-panel
simultaneously
The two green
indicators (left
and right) are on
The two “Green
arrow” pictograms
(left and right) are
on
Turnstile gets blocked
for passage in that
direction
4
Free
passage in
the set
direction
Press the
STOP
button and the
button
corresponding to
the chosen
passage
direction
simultaneously
The green
indicator above
the button of the
chosen passage
direction is on
The “Green arrow”
pictogram, showing
the passage
direction, and the
“Red cross”
pictogram from the
opposite side are on
Turnstile remains open
in the set direction
5
Free
passage in
the set
direction
and single
passage in
the opposite
direction
Carry out
actions stated in
Chapters 2 and
4 of the present
table in any
order
The two green
indicators (left
and right) are on
The two “Green
arrow” pictograms
(left and right) are
on
After the passage in the
free passage direction
the turnstile remains
open in both directions.
After the passage in the
single passage direction
the turnstile remains
open in the free passage
direction but it is gets
blocked in the single
passage direction
6 Always free
Press all the 3
buttons on the
RC-panel
simultaneously
The two green
indicators (left
and right) are on
The two “Green
arrow” pictograms
(left and right) are
on
Turnstile remains open
At the turnstile power supply switching-on the turnstile initial state is closed (the mechanical
release lock (7) should be locked with the key (8)).
In the “Single passage in the set direction” mode the turnstile will close automatically after a
person’s passage in the set direction. The turnstile will also close automatically, if the passage is
not made within 5 sec. In the “Bidirectional single passage” mode after the passage in one
direction the countdown of the passage waiting time (5 sec) for the opposite direction is
recommenced.
9.3 Operating modes of the turnstile at potential control mode
See Table 4 for the operating modes set with the RC panel. Setting the operating modes for each
direction is independent, i.e. setting the operating mode for one direction does not change the
operating mode set earlier for the opposite one.
