AS-i/PROFIBUS GatewayAS-i/PROFIBUS-Gateway
Operating in Advanced Display Mode
Subject to reasonable modifications due to technical advances.
Copyright Fuchs, Printed in Germany
Fuchs Group · Tel.: Germany (6 21) 7 76-0 · USA (3 30) 4 25 35 55 · Singapore 7 79 90 91 · Internet http://www.pepperl-fuchs.com
Is
s
ue dat
e -
12.
8.
2007
41
7.7.4
Actual Config (actual configuration)
A C T U A L C O N F I G
0 A
I
1 A - C f
2 A x
I 3 A d
4 p
I 5 A
This function shows the state of the actual configuration of the individual AS
-
i sla-
ves.
At the end of the list there is a help text describing the abbreviations:
X (O.K.):The configuration data of the detected AS
-
i slave matches the projected
configuration data.
D (Detected Only):An AS
-
i slave is detected at this address, but not projected.
P (Projected Only):An AS
-
i slave is projected at this address, but not detected.
C (Type Conflict):The configuration data of the detected AS
-
i slave does not
match the projected configuration data. The actual detected
configuration of the connected AS
-
i slave is displayed.
F (Periph. Fault):The AS
-
i slave has a peripheral fault.
A (Duplicate Adr.):2 AS-i slaves in the indicated address
After selecting the desired AS
-
i slave address the values for the actual configura-
tion data are displayed behind the respective address in the following order:
IO (I/O-configuration) ID (ID-configuration) xID1 (extended ID1)
xID2 (extended ID2)
Furthermore the state of the configuration is displayed in plain text.
If no AS
-
i slave is detected and no AS
-
i slave is projected at a certain address, four
dots instead of the configuration data are displayed.
7.7.5
LPF (List of periphery faults)
L P F L I S T O F
P E R I P H . F A U LT S
I 1 A - x
2 A -
I 3 A -
The list shows AS
-
i slaves, which have released a peripheral fault.
Empty field: Periphery O.K.
X:
Peripheral fault
0 A - . . . . -
1 A - 7 A 2 8 - C
T Y P E C O N F L I C T
