Iss
u
e d
a
te
: 17
.4
.20
0
9
110
Subject to reasonable modifications due to technical advances.
© Fuchs, Printed in Germany
Fuchs Group · Tel.: Germany (6 21) 7 76-0 · USA (3 30) 4 25 35 55 · Singapore 7 79 90 91
Internet http://www.pepperl-fuchs.com
AS-i 3.0 EtherNet/IP Gateway with integrated Safety Monitor
Operation in advanced display mode
See also <Advanced Diagnostics for AS-i Masters>.
By using "Clear all" and "Set all" all bits in this list can be delete or set, respective-
ly, at the same time. Below this is a list of all slaves that can be selected individu-
ally in order to set or delete the LOS bit.
9.9.9
CHIPCARD
Main menu || SETUP ||
CHIPCARD
||
This function is used to send unsafe AS-i data between the master and chip card.
In addition, the unsafe section of the chip card can be deleted.
For additional information refer to chap. <Chip card>.
9.9.10
Language (menu language)
Main Menu || SETUP ||
LANGUAGE
||
From this menu you can select the menu language. „X“ marks the currently se-
lected language.
9.9.11
FACTORY RESET (factory default settings)
Main Menu || SETUP || FACTORY RESET ||
Empty field: LOS bit deleted
X: LOS bit set
CHIPCARD
CARD -> MASTER
MASTER -> CARD
CLEAR CHIPCARD
CHIPCARD->MASTER: Chip card data are copied to the Monitor
MASTER->CHIPCARD: Monitor data are copied to the chip card
CLEAR CHIPCARD: Chip card data are cleared
LANGUAGE
ENGLISH X
DEUTSCH
FRANÇAIS
ITALIANO
ESPAÑOL
FACTORY RESET
DO RESET
