manualshive.com logo in svg

Pepperl+Fuchs VAS-2A1L-K31, Manual

Share
Download
Pepperl+Fuchs VAS-2A1L-K31 Manual Download Page 36

Iss

u

e d

a

te

: 21

.1

0.2

011

34

Subject to reasonable modifications due to technical advances.

© Fuchs, Printed in Germany

Fuchs Group · Tel.: Germany (6 21) 7 76-0 · USA (3 30) 4 25 35 55 · Singapore 7 79 90 91

Internet http://www.pepperl-fuchs.com

AS-i Safety Monitor for 2 AS-i circuits

Electrical connection

7.5

Diagnostics interface

The service and diagnostics interface (in conjunction with 

AS-i Control Tools

 or

ASIMON 3 G2

 software) is used for communication between the PC and the unit.

7.5.1

VAS-4A16L-K31, VAS-2A1L-K31

The service and diagnostics interface is configured as a mini DIN-6 female  and it
is placed on the front plate, on the left hand side.

7.6

Chip card

The configuration is stored in a fixed installed EEPROM and can be overwritten
by the chip card. The chip card does not have to be inserted in operation.

Warning!

Power must always be turned off when removing or inserting the chip card!

Summary of Contents for VAS-2A1L-K31













































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands