2
0
1
7
-0
6
42
Configuration and Analysis with DTM via IO-Link
7.7
Service Menu Option
Figure 7.17
You can use the
Service
menu option to set the following service functions.
■
Reset to factory defaults:
activating the switch resets the sensor to settings as
delivered. All previous parameter changes are lost as a result of this.
■
Locator indication:
setting the "localization display" to "enabled" makes the LEDs flash
simultaneously. This function can be used to localize a sensor in a plant or machine more
easily. This function is disabled by default, which means that the LEDs indicate status and
diagnostic information.
