19
9165
201
3-
06
12
OIT***-F113-B12-CB*
Product Description
Connection for a trigger sensor
A 4-pin, M12 socket is located on the side of the housing of the OIT system for
connecting a trigger sensor. The pin assignments are shown in the following
illustration:
Figure 4.6
Trigger sensor pin assignments
Network connection
On the side of the housing of the OIT system is a network jack for connecting an
RJ45 network plug. The pin assignments are shown in the following illustration:
Figure 4.7
Network connection pin assignments
1
24 V trigger sensor power supply
2
Not assigned
3
Ground (GND)
4
Trigger signal (TRIG)
1
Transmit data (+)
2
Transmit data (-)
3
Receive data (+)
4
Not assigned
5
Not assigned
6
Receive data (-)
7
Not assigned
8
Not assigned
1
3
2
4
3
4
5
6
7
8
1
2