Pepperl+Fuchs OHV110-F228-R2, Manual, Page: 17 / 55

OHV110-F228-R2
Configuration
2
0
2
0
-0
9
17
4.3.3 Test Statistics
This area shows information about the read code.
Figure 4.5 Test statistics
4.3.4 Updating Firmware
1.
Click on Upload new file to sensor or select Sensor > Update Firmware in the menu bar.
2.
Select a firmware file with the extension crz.
3.
The firmware file is transferred to the handheld reader. Uploading the firmware takes a few
minutes.
4.
Once the file has been transferred, the handheld reader automatically restarts.
The firmware is now updated. You can check the firmware version in the Device data area.
Display ASCII value Enable this option to display the read result in ASCII characters.
Reset Clears the contents of the Test statistics area.