Pepperl+Fuchs OHV10-F228-R2, Manual, Page: 9 / 43

OHV10-F228-R2
Installation
2
0
2
1
-0
1
9
3 Installation
3.1 Connection
You can connect the handheld reader to the following interfaces.
• USB
• RS-232
3.1.1 Installing/Removing the Cable
Installing the Cable
1.
Hold the end of the cable with the RJ50 plug and insert the plug into the RJ50 socket
underneath the handle.
Figure 3.1 Inserting the cable
2.
Make sure that the cable audibly snaps into place.
Removing the Cable
1.
Insert a thin object such as a straightened paper clip into the hole on the side at the bottom of
the handle.
Figure 3.2 Removing the cable
2.
Carefully pull the cable and the RJ50 plug out of the handle.