7
TDOCT-
3147_E
NG
259858
08/
2013
Pressure Transmitter LHCR-51, LHCS-51
Mounting
2.3
Mounting Pressure Transmitter
When mounting rod and cable versions, make sure that the probe head is located at
a point as free as possible from flow. To protect the probe from impact resulting from
lateral movement, mount the probe in a guide tube (preferably made of plastic) or
secure it with a clamping fixture.
In the case of devices for hazardous areas, comply strictly with the safety instructions
when the housing cover is open.
The length of the extension cable or the probe rod is based on the planned level zero
point. The height of the protective cap must be taken into consideration when
designing the layout of the measuring point. The level zero point (E) corresponds to
the position of the process isolating diaphragm.
Level zero point = E; top of the probe = L.
L
E
DOCT3147_eng.book Seite 7 Freitag, 16. August 2013 4:58 16
