2597
78 2013-
02
32
Operation
7. Press the left selection button to write the data to the data carrier
(
).
If the write operation is successful, OK appears on the display and the
status LED flashes green. If you selected the buzzer and the vibration alarm in
the Settings menu, you will also hear an acoustic signal and the handheld will
vibrate. If the transmission fails, the status LED flashes briefly red and a fault
message is output.
7.4
Editing or Entering Data Manually
Editing data manually
To edit data that has already been read in, proceed as follows:
1. Select
Memory
.
2. Scroll to the required data set using the left navigation button (
) or the right
navigation button (
).
3. Press the left selection button (
) to access the options.
4. Select
Modify
.
5. Press the
button to delete individual characters. In principle, you can
only delete the character last entered, not individual characters within the
string.
6. Enter the required changes using the input buttons.
7. Press the left selection button to confirm your changes (
).
The value in the memory is modified.
Note!
Observe the input format
Data bytes in hexadecimal data format must always contain 2 characters and data
bytes in decimal data format must contain 3 characters.
Send
Edit
Delete
Send all
Delete all
Enter Data
Option
ESC
Read/Write
Storage
Settings
Teach in
Applications
About
