2
02
0-
11
60
FDS/OPC Integration
6.
If the Diagnostic Gateway is located in a different subnet, enter its IP address in the
Remote
subnet IP address
field and choose
Add
.
Then choose
Update
to find all Diagnostic Gateways in the subnet.
Figure 5.15 Scanned gateways
7.
To identify a gateway in the cabinet, select the gateway from the list and choose
Locate
selected gateway(s)
.
Gateways LEDs are flashing in the cabinet.
8.
Drag the
Diagnostic Gateway
from the Unassigned Diagnostic Gateways area on an
unassigned
???
port in the topology structure.
IP address and tag of the Diagnostic Gateway are automatically assigned to the port.
Figure 5.16 Assigned gateway
9.
Choose
Apply
to confirm changed settings.
5.4.5
Assign HD2-DM-A Addresses
Registering the Device Address of Diagnostic Modules
Each advanced diagnostic module (ADM) has a device address that is assigned directly on the
device. See chapter 4.1.2
In order to register the device address of each ADM, proceed as follows:
1.
Right-click the
FieldConnex
®
Diagnostic Server
in the project section and choose
Parameter
.
2.
Select the
FDS Topology
tab.
3.
Select the ADM you want to configure in the topology structure.
4.
Select the device address for the selected ADM in the
Address of the ADM
drop-down list.
Figure 5.17 Device address settings
5.
Choose
Apply
to confirm changed settings.
