Pepperl+Fuchs AS-I 3.0, Manual, Page: 62 / 177

Is
s
u
e
d
a
te
:
7
.6
.2
0
1
3
62
AS-i 3.0 Command Interface
Commands of the Command Interface
4.4.16 Get Slave Error Counters (GET_SLV_ERRCOUNT)
With this call the slave error counter register will be read out.
The read-out error counter listings correspond to the error counter listings of the
display.
* Toggle bit, circuit selection and response code are not applicable when called by DLL
!!!
The command GET_SLV_ERRCOUNT is valid only for the use with masters
which support this function.
Please see the user manual of the master for further information.
Request
byte
2
7
2
6
2
5
2
4
2
3
2
2
2
1
2
0
1 14
16
2
T
* circuit
3 slave address
Tab. 4-107.
Response
byte
2
7
2
6
2
5
2
4
2
3
2
2
2
1
2
0
1 14
16
2
T
* result
3 no slave, high byte
4 no slave, low byte
5 no slave telegram, high byte
6 no slave telegram, low byte
7 slave telegram error, high byte
8 slave telegram error, low byte
9 peripheral faults, high byte
10 peripheral faults, low byte
11 protocol fault, high byte
12 protocol fault, low byte
13 master telegram, high byte
14 master telegram, low byte
Tab. 4-108.