Pepperl+Fuchs AS-I 3.0, Manual, Page: 176 / 177

Is
s
u
e
d
a
te
:
7
.6
.2
0
1
3
176
AS-i 3.0 Command Interface
Command Interface Examples
5.4.4 Example device index identifier
(read identifier as plain text)
1. Start the request.
2. Read the response.
byte 1 0x4E
byte 2 0x80 (0x00, toggle bit)
byte 3 0x15 (address of ext. safety monitor , i.e. Adr. 21)
byte 4 0x00 (puffer index high)
byte 5 0x00 (puffer index low)
byte 6 0x10 (command 16 - device identifier)
byte 7 0x03 (number of following bytes)
byte 8 0x00 (device index high byte)
byte 9 0x00 (device index low byte)
byte 10 0x00 (output sorted (1) / unsorted (0)
Tab. 5-378.
byte 1 0x4F
byte 2 0x00 (0x80, toggle bit)
byte 3 0x10 (command 16 - device identifier)
byte 4 0x00 (response length high byte (n bytes iden 2 byte device Index))
byte 5 0x0B (response length low byte (n bytes iden 2 byte device Index))
byte 6 0x4E (identifier byte 1 (ASCII mark 'N'))
… …
byte 15 0x31 (identifier byte 11 (ASCII mark '1'))
byte 16 0x00 (device index (0...255) high byte)
byte 17 0x00 (device index (0...255) low byte)
Tab. 5-379.