peplink Pepwave MAX Series, User Manual

Page: 82 / 218

https://www.peplink.com Copyright @ 2021 Pepwave
One of the WANs connected to Router A is non-NAT’d (
212.1.1.1
). The rest of the WANs
connected to Router A and all WANs connected to Router B are NAT’d. In this case, the Peer
IP Addresses / Host Names field for Router B should be filled with all of Router A’s hostnames
or public IP addresses (i.e.,
212.1.1.1
,
212.2.2.2
, and
212.3.3.3
), and the field in Router A can
be left blank. The two NAT routers on WAN1 and WAN3 connected to Router A should inbound
port-forward TCP port 32015 to Router A so that all WANs will be utilized in establishing the
VPN.
13.3
SpeedFusion TM Status
SpeedFusion
TM
status is shown in the Dashboard . The connection status of each connection
profile is shown as below.
After clicking the Status button at the top right corner of the SpeedFusion
TM
table, you will be
forwarded to Status>SpeedFusion TM , where you can view subnet and WAN connection
information for each VPN peer. Please refer to Section 22.6 for details.
IP Subnets Must Be Unique Among VPN Peers
The entire interconnected SpeedFusion
TM
network is a single non-NAT IP network. Avoid duplicating
subnets in your sites to prevent connectivity problems when accessing those subnets.
14 IPsec VPN
IPsec VPN functionality securely connects one or more branch offices to your company's main