Pepita SmileSPORT Racing PRO 700, User Manual

Page: 7 / 48

• Mount the right pedal (12) with the R mark on the frame (1) and secure it with a wrench (26).
Note: tighten clockwise.
• In the same way, mount the left pedal (13) with the L mark (1) and secure it with a wrench (26).
Note: tighten counter-clockwise.
• Fit the adjustment knobs (14) to the front and rear of the frame (1).
No tightening is required here.
STEP 3
• The saddle post (4) is inserted into the main frame (1) and the adjustment knob (14) is pulled out so that the
adjustment knob (14) is automatically inserted into the corresponding hole in the saddle post (4).
• The handlebar support (5) and the adjusting knob (2) are inserted in the same way into the main frame (1).
•
Note: The height of the saddle (4) or handlebar (5) can be adjusted by pulling out the adjustment
knob (14). After adjustment, the adjusting knobs (14) must be tightened.