PEP Modular Computers CP345, Manual

Page: 69 / 80

CP345 Rear I/O Modules
ID 19979, Rev. 03 Page 5 - 13
©
PEP Modular Computers GmbH
5.1.2.2 Rear I/O Interface
The non-optoisolated rear I/O module CP-RIO-345 is provided with a PCI rear I/O inter-
face connector RJ2. All signals from the TTL serial I/O interface are routed to this con-
nector. The active high/low status of the signals depends on the protocol used.
N/C = not connected.
Table 2-2: Pinouts of Rear I/O Module Rear I/O Connector RJ2
Pin Row “Z” Row “A” Row “B” Row “C” Row “D” Row “E” Row “F”
1 N/C MD31 GND MD21 MD11 N/C GND
2 N/C MD30 +5V MD20 MD10 N/C GND
3 N/C N/C GND RxCLK2 RxCLK1 MD01 GND
4 N/C N/C +5V TxCLK2 GND MD00 GND
5 N/C RxCLK3 GND N/C TxCLK1 RxCLK0 GND
6 N/C TxCLK3 +5V RES2 GND TxCLK0 GND
7 N/C RES3 GND N/C RES1 RES0 GND
8 N/C DCD3 +5V DCD2 GND DCD0 GND
9 N/C DSR3 GND N/C DCD1 DSR0 GND
10 N/C CTS3 +5V DSR2 GND CTS0 GND
11 N/C RxD3 GND N/C DSR1 RxD0 GND
12 N/C DTR3 +5V CTS2 GND DTR0 GND
13 N/C RTS3 GND N/C CTS1 RTS0 GND
14 N/C TxD3 +5V RxD2 GND TxD0 GND
15 N/C N/C GND DTR2 RxD1 N/C GND
16 N/C +5V +5V RTS2 GND +5V GND
17 N/C N/C GND TXD2 DTR1 N/C GND
18 N/C +5V N/C +5V GND +5V GND
19 N/C GND GND N/C RTS1 N/C GND
20 N/C N/C GND N/C GND N/C GND
21 N/C N/C GND N/C TxD1 N/C GND
22 N/C N/C N/C N/C N/C N/C GND