PEP Modular Computers CP331, Manual

Page: 17 / 44

CP331 Introduction
ID 19947, Rev. 0200 Page 1 - 5
©
2000 PEP Modular Computers GmbH
A complete list of the physical board interfaces of all board variants is given in the fol-
lowing table:
* Signals directed to PanelLink connector board.
1.2.3 PanelLink Adapter Module
To the customizable 64-pin on-board connector CON8 of the standard board version a
customer-specific flatpanel adapter can be connected. However, with the CP331 stan-
dard version no throughput of the signals to a frontpanel connecter is foreseen.
The board variant CP331-PL instead is provided with a plug-on module acting as an
adapter between the 64-pin on-board connector CON8 and the 20-pin PanelLink con-
nector on the frontpanel. Therefore, no other connection can be established to the con-
nector CON8 when using the PanelLink adapter module.
1.2.4 System-Relevant Information
In the following information is supplied which must be taken into account before running
or installing a CP331 board in your CompactPCI system.
Operating Systems
The CP331 can operate under the following operating systems:
• Windows 95
• Windows 98
• Windows NT
• Windows 2000
Table 1-1: Board Variants/Connectivity
Connectivity CP331 CP331-PL CP331-LVDS
Frontpanel
Connectors
VGA VGA VGA
— — LVDS
— PanelLink —
On-board
Connectors
CON8 CON8* —
CON9 CON9 —
— — CON10
Note...
More than one CP331 board can be installed in a system under
Windows 98 and Windows 2000. With earlier versions of the
Windows operating system only one CP331 can operate in a
system.