58
Why should I ever select anything other than BOTH?
According to the USB standard, the embedded storage cannot be available to both the
veu
and
the computer at the same time, and thus it has to be switched (automatically or manually)
between them.
When the
veu
requires access to the embedded storage to SAVE captured images, it
automatically attempts to virtually disconnect the storage from the computer, save the
captured image, and then reconnect the storage to the computer.
In Windows machines and in most cases, setting FILE ACCESS to BOTH will work fine; the
computer and the
veu
are able to interchangeably access the storage with ease.
In Linux machines, some Mac OS machines, and for slower computers, it is recommended to
manually switch the storage access between the
veu
and the computer (Set FILE ACCESS to VEU
when using the
pen
, and set to PC when accessing the storage from the computer via USB). The
automatic switching procedure is often non compatible and may fail to execute.
3.8.7
Setting the TIME and DATE
Use the TIME and DATE options to set the time on your
penveu
system
. When you save an
image using the
Capture
Button
,
penveu
will embed the time and date at which the
image was saved in the image metadata.
To set the time, press the
menu
Button
while in pen mode to display the
menu
User Interface.
Lightly slide your finger along the
Touch Scroll
until the TIME option is highlighted.
Press the
Pen Button
to select this option and advance to the next wheel.
Select the HOUR option to set the hour.
Press the
Undo/Back Button
to return to the previous wheel, and set the MINUTE and
AM/PM options.
To exit the
menu
User Interface
without selecting any options, continue pressing the
Undo/Back Button
.
To set the date, Press the
menu
Button
while in pen mode to display the
menu
User Interface.
