Penveu penveu32 User Manual Download

Page: 57 / 86

3.8.6

Saving Other Files to the

veu

You can also save other file formats to the memory on the

veu

, such as documents, PowerPoint

presentations, spreadsheets, music and videos. These file types are only visible by the computer
source through the USB cable. Use a simple “Drag and Drop” action or Copy and Paste to add or
remove other files to the

penveu

device.

Notes:

Do not attempt to SAVE (capture) images while moving files to the

penveu

drive.

DO NOT Capture an image using the

penveu

system

while the PC is SAVING a file.

Use the

pen

in mouse mode to open files and launch applications. You can display

any

file from

your computer and use

penveu

to make notations on the display, but remember that the

writing is “virtual.” If you make notations on the display, you can save captured images with

penveu

and the original files remain intact (unchanged). The

penveu

does not alter the original

file.

NOTE: Choosing the appropriate FILE ACCESS Setting

See

Section 3.9.8 FILE ACCESS

for detailed information

The

penveu

system

has an 8GB or 32GB storage embedded in the

veu

. It is where the saved

images are stored, and where the user can save their own user files.

To access the storage via the USB cable, the

storage

needs to be accessible to the computer.

Use the FILE ACCESS settings to make sure that the computer has access to the embedded
storage.

In the

menu

User Interface,

go to SETTINGS / FILE ACCESS and choose either:

BOTH

Commonly used with Windows machines. The storage will be accessible both the

veu

and

the computer connected through the USB port.

Commonly used with Linux machines. The storage will be accessible to the computer

only. Therefore, the

veu

will not be able to access the storage to SAVE additional

captured images.

Summary of Contents for penveu32






















































































Search results

Summary of Contents for penveu32

Reviews:

Related manuals for penveu32

Brands by name

Popular brands

Penveu penveu32, User Manual

Search results

Summary of Contents for penveu32

Reviews:

Related manuals for penveu32

Brands by name

Popular brands