Penveu penveu32 User Manual Download

Page: 55 / 86

When the

veu

requires access to the embedded storage to SAVE captured images, it

automatically attempts to virtually disconnect the storage from the computer, save the
captured image, and then reconnect the storage to the computer.

In Windows machines and in most cases, setting FILE ACCESS to BOTH will work fine; the
computer and the

veu

are able to interchangeably access the storage with ease.

In Linux machines, some Mac OS machines, and for slower computers, it is recommended to
manually switch the storage access between the

veu

and the computer (Set FILE ACCESS to VEU

when using the

pen

, and set to PC when accessing the storage from the computer via USB). The

automatic switching procedure is often non compatible and may fail to execute.

3.8.4

LOAD (Display a Saved Image)

Use the LOAD option to view previously captures images saved on the

veu

in the

penveu/penveuSavedImages

directory.

Press the

menu

Button

when in pen mode to display the

menu

User Interface

The image names appear on the center wheel of the

menu

User Interface

. A thumbnail

preview image appears below the center wheel.

Note

: The image filenames may be changed

(Rename) using your computer and accessing the

penveu/penveuSavedImages

directory.

Lightly slide your finger along the

Touch Scroll

until the LOAD option is highlighted.

Press the

Pen Button

to select this option and advance to the next wheel.

Repeat these steps to select the desired image.



Select VIEW to display the selected image on the screen.
The word will appear and blink at the top of the display.



Select DELETE to remove the selected image from the

veu

memory.



Select EXIT to close the

menu

User Interface

without performing any function.

To close the image after using the LOAD option:

Press and hold the

Undo/Back Button

then select

YES

CLEAR ALL, or

Press the

Mode Button

to switch to mouse mode,

Press the

menu

Button

, open the

menu

User Interface

, select LOAD – any image –

EXIT

Summary of Contents for penveu32






















































































Search results

Summary of Contents for penveu32

Reviews:

Related manuals for penveu32

Brands by name

Popular brands

Penveu penveu32, User Manual

Search results

Summary of Contents for penveu32

Reviews:

Related manuals for penveu32

Brands by name

Popular brands