Pentax WG-10 Operating Manual Download Page 20

Page: 20 / 298

In this manual, the method for operating the four-way controller is shown
in illustrations, such as in the one below.

The meanings of the symbols used in this Operating Manual are
explained below.

Indicates the reference page number for an explanation of the
related operation.

Indicates information that is useful to know.

Indicates precautions to be taken when operating the camera.

Mode

This is the mode for taking still pictures and recording movies. In
this manual, "Still Picture Capture Mode" is the mode for taking
still pictures.

Mode

This is the mode for viewing still pictures and playing back movies
and sound files.

Summary of Contents for WG-10











































































































































































































































































































Search results

Summary of Contents for WG-10

Reviews:

Related manuals for WG-10

Brands by name

Popular brands

Pentax WG-10, Operating Manual

Search results

Summary of Contents for WG-10

Reviews:

Related manuals for WG-10

Brands by name

Popular brands