3
Sh
oo
ting
39
1
Press
C
in standby mode.
2
Use
CD
to select an item.
3
Press
B
, and use
V
to compensate the flash
output.
Press
M
to reset the value.
4
Press
E
.
The camera returns to standby mode.
5
Slide the flash pop-up
switch.
u
Caution
• Be sure to retract the built-in flash if not planning to use it.
Be careful not to get your fingers pinched when retracting
the flash.
• The built-in flash discharges even when retracted, which may
cause vignetting to occur depending on the lens being used.
If you do not want to let the built-in flash discharge while it is
retracted, set [11. Flash When Retracted] in the
E
2 menu.
Using the Built-in Flash
Y
A
Auto Flash
Discharge
Automatically measures the ambient
light and determines whether to use
the flash.
B
Auto Flash
+Red-eye
Reduction
Discharges a pre-flash for red-eye
reduction before an automatic flash.
C
Flash On
Discharges a flash for each picture.
D
Flash On
+Red-eye
Reduction
Discharges a pre-flash for red-eye
reduction before the main flash.
E
Slow-speed
Sync
Sets to a slow shutter speed.
Use this when shooting a portrait
with the sunset in the background.
F
Slow-speed
Sync+Red-
eye
Discharges a pre-flash for red-eye
reduction before the main flash is
discharged with Slow-speed Sync.
Auto Flash Discharge
Auto Flash Discharge
Cancel
Cancel
OK
OK
OK
MENU
0.0
0.0
H
G
Trailing
Curtain
Sync
Discharges a flash immediately before
closing the shutter.
Sets to a slow shutter speed.
Captures moving objects as if they are
leaving a light trail behind them.
J
Flash Off
The flash is deactivated.
Auto Flash Discharge
Auto Flash Discharge
Cancel
Cancel
OK
OK
OK
MENU
+0.7
+0.7
e_kb560_om.book Page 39 Friday, August 22, 2014 7:35 AM
Summary of Contents for QS-1
Page 109: ......
