Pentax OPTIO L50 Operating Manual Download Page 32

Page: 32 / 212

Getting Started

Precautions When Using an SD Memory Card

• The SD Memory Card is equipped with a

write-protect switch. Setting the switch to

LOCK protects the existing data by

prohibiting recording of new data, deletion

of existing data or formatting of the card.

appears on the display when the card is

write-protected.

• Care should be taken when removing the SD Memory Card immediately after

using the camera, as the card may be hot.

• Do not remove the SD Memory Card or turn the camera off while data is

being saved to the card, images or sound files are being played back, or the

camera is connected to a computer with the USB cable, as this may cause

the data to be lost or the card to be damaged.

• Do not bend the SD Memory Card or subject it to violent impact. Keep it away

from water and store away from high temperature.

• Do not remove the SD Memory Card during formatting as this may damage the

card and render it unusable.

• The data on the SD Memory Card may be deleted in the following

circumstances. PENTAX does not accept any liability for data that is deleted

(1) when the SD Memory Card is mishandled by the user.

(2) when the SD Memory Card is exposed to static electricity or electrical

interference.

(3) when the card has not been used for a long time.

(4) when the card is ejected or the battery is removed while the data on the

card is being recorded or accessed.

• If it is not used for a long time, the data on the card may become unreadable.

Be sure to regularly make a backup of important data on a computer.

• Avoid using or storing the card where it may be exposed to static electricity or

electrical interference.

• Avoid using or storing the card in direct sunlight or where it may be exposed

to rapid changes in temperature or to condensation.

• When using an SD Memory Card with a slow recording speed, recording may

stop while you are taking movies even when there is adequate space in the

memory, or shooting and playback may take a long time.

• For information on compatible SD Memory Cards, visit the PENTAX website.

• Be sure to format an SD Memory Card that is unused or has been used on

another camera. Refer to “Formatting an SD Memory Card or the Built-in

Memory”. (p.162)

• Please note that formatting the SD Memory Card will not necessarily delete the

data so that it cannot be recovered using off-the-shelf data recovery software.

There are off-the-shelf secure data deletion software programs available that will

completely delete the data. If you are going to discard, give away or sell your SD

Memory Card, you should ensure that the data on the card is completely deleted

or the card itself is destroyed if it contains any personal or sensitive information. In

any case, the data on your SD Memory Card should be managed at your own risk.

Write-protect

switch

Summary of Contents for OPTIO L50





















































































































































































































Search results

Summary of Contents for OPTIO L50

Reviews:

Related manuals for OPTIO L50

Brands by name

Popular brands

Pentax OPTIO L50, Operating Manual

Search results

Summary of Contents for OPTIO L50

Reviews:

Related manuals for OPTIO L50

Brands by name

Popular brands