manualshive.com logo in svg

Pentax Optio E90 Black, Operating Manual

Share
Download
Pentax Optio E90 Black Operating Manual Download Page 37

35

1

Getting Started

Turning the Camera On and Off

1

Press the power switch.

The camera turns on and the display turns on.
When you turn the camera on, the lens cover opens and the lens 
extends.
If the [Language/

] screen or [Date Adjustment] screen appears 

when you turn the camera on, follow the procedure on p.37 to set the 
display language and/or current date and time.

2

Press the power switch again.

The display turns off, the lens closes, and the camera turns off.

The memory card is checked when the camera 
turns on and the memory status is displayed.

a

:

The SD Memory Card is inserted. 
Images will be saved on the SD 
Memory Card.

+

:

The SD Memory Card is not inserted. 
Images will be saved in the built-in 
memory.

r

:

The write-protect switch on the SD 
Memory Card is in the LOCK position (p.33). 
Images cannot be recorded.

Taking Still Pictures 

1

p.56

Checking the Memory Card

Power switch

3 8

3 8

3 8

1 4 : 2 5

1 4 : 2 5

1 4 : 2 5

0 2 / 0 2 / 2 0 1 0

0 2 / 0 2 / 2 0 1 0

Memory status

Summary of Contents for Optio E90 Black











































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands