Pentax MX-1 Operating Manual Download Page 113

Page: 113 / 244

111

Tak

ing Pi

ctures

Use the four-way controller (

)

or the e-dial to select a custom
image, and press four-way
controller (

The screen for selecting parameters
appears.

Use the four-way controller (

)

to choose a parameter you want to
change.

The following parameters can be changed
according to the selected image finishing
tone.

Use the four-way controller (

) or the e-dial to

change the settings.

The background image changes according to the settings.
You can check the saturation, hue, contrast and sharpness with the
radar chart.

Press the

button.

The screen that was displayed in Step 2 appears again.

Image Tone

Parameter

Bright/Natural/Vibrant

Saturation: -2 to +2

Hue: -2 to +2

Contrast: -1 to +1

Sharpness: -1 to +1

Reversal Film

Sharpness: -1 to +1

Monochrome

Filter Effect: None/Green/Red/Blue/Infrared
Filter

Tone Adjustment: Blue2/Blue1/Standard/Sepia1/
Sepia2

Contrast: -1 to +1

Sharpness: -1 to +1

Cancel

Bright

Cancel

Saturation

Summary of Contents for MX-1





















































































































































































































































Search results

Summary of Contents for MX-1

Reviews:

Related manuals for MX-1

Brands by name

Popular brands

Pentax MX-1, Operating Manual

Search results

Summary of Contents for MX-1

Reviews:

Related manuals for MX-1

Brands by name

Popular brands