105
2
Tak
ing Pi
ctures
1
Use the four-way controller (
23
) to select [D-Range
Setting] in the [
A
Rec. Mode 2] menu, and press the
four-way controller (
5
).
The [D-Range Setting] screen appears.
2
Use the four-way controller (
23
) to select [Highlight
Correction] or [Shadow Correction], and press the four-
way controller (
5
).
3
Change the setting.
For [Highlight Correction]
Use the four-way controller (
23
) to select [Auto], [On] or [Off], and
press the
4
button.
When you select [Auto], the camera switches between [On] and [Off]
automatically.
For [Shadow Correction]
Use the four-way controller (
45
) to switch between
O
(On) and
P
(Off).
You can set whether to use the ND filter.
1
Select [ND Filter] in the [
A
Rec. Mode 1] menu and
press the four-way controller (
5
).
• When [Highlight Correction] is set to [On], the minimum sensitivity is
doubled.
• The [Highlight Correction] and [Shadow Correction] settings can also
be changed using the control panel.
Setting the ND Filter
Auto
The ND filter is used when the camera determines that the filter is
necessary. (Default setting)
Cannot be selected when capture mode is
a
(Manual Exposure) or
C
(Movie).
On
The ND filter is always used.
Off
The ND filter is not used.
