103
2
Tak
ing Pi
ctures
2
Under the light you wish to measure the white balance
of, fully display a white sheet of paper on the display, or
select a white area as the subject.
3
Press the shutter release button fully.
The white balance is automatically adjusted.
4
Press the
4
button.
The [
A
Rec. Mode 1] menu is resumed.
5
Press the
3
button.
The camera is ready to take a picture.
You can fine-tune the white balance setting.
1
Select the desired white balance in Step 2 on p.102.
2
Press the
d
/
i
button.
The fine-tuning screen appears.
3
Fine-tune the white balance.
Available operations
• No image is recorded when the shutter release button is pressed to
adjust the white balance.
• The message [Cannot process correctly] appears when measuring is
unsuccessful. Press the
4
button while displayed to remeasure the
white balance.
• If a picture is extremely overexposed or underexposed, the white
balance may not be adjusted. In this case, adjust exposure to the
correct exposure before adjusting the white balance.
To Fine-tune the White Balance
Four-way controller
(
23
)
Adjusts the tone of the colors between
green (G) and magenta (M).
Cancel
Cancel
OK
OK
