manualshive.com logo in svg

Pentax Model Optio S60, Operating Manual

Share
Download
Pentax Model Optio S60 Operating Manual Download Page 27

25

1

Getting Started

Turning the Camera On and Off

1

Press the power switch.

The camera turns on.
The lens cover opens and the lens extends when the camera is turned 
on.

2

Press the power switch again.

The camera turns off.

The SD Memory Card is checked automatically 
when the camera is turned on. 

?

 appears on the 

LCD monitor when a card has been inserted and 
images and sound are recorded on the card. 

Y

 

appears instead of 

?

 when the write-protect 

switch on the SD Memory Card is in the locked 
position (p.22). Images and sound cannot be 
recorded, deleted or the card cannot be 
formatted when the write-protect switch is locked.

@

 appears when no card has been inserted and images and sounds are 

recorded in the built-in memory.

Switching between Capture Mode and Playback Mode 

1

p.46

Taking Pictures 

1

p.46

Checking the SD Memory Card

Q

 Playback button

Power switch

4

4

1 0 : 2 5

1 0 : 2 5

1 0 : 2 5

0 9 / 1 0 / 2 0 0 5

0 9 / 1 0 / 2 0 0 5

0 9 / 1 0 / 2 0 0 5

Memory status indicator

Summary of Contents for Model Optio S60





























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands