Pentax KS1, Start Manual

Page: 8 / 56

6
With this camera, you can take pictures while looking through
the viewfinder or while viewing the image on the monitor.
When using the viewfinder, you can take pictures while
checking the status screen displayed on the monitor and looking
through the viewfinder. When not using the viewfinder, you can
take pictures while viewing the Live View image displayed on
the monitor.
The camera is in “standby mode” when it is ready to shoot, such
as when the status screen or Live View image is displayed.
Press
G
in standby mode to display the “control panel” and
change settings. (p.10) You can change the type of information
displayed in standby mode by pressing
G
while the control
panel is displayed.
Monitor
Capture Mode
1/ 1/
250 250
1600 1600
FF
5.6 5.6
99999 99999
G
G
10:23 10:23
99999 99999
1/ 1/
250 250
1600 1600
FF
5.6 5.6
99999 99999
Status Screen Status Screen Status Screen
Custom Image Custom Image Custom Image
Bright
Bright Bright
07/07/2014 07/07/2014
Standby mode
(Status screen)
Shooting Info Display selection screen
Control panel
Status Screen
1 Capture mode 16 Sensitivity
2 AE Lock 17 Flash Exposure
Compensation
3 Focus Method
4 Custom Image 18 White Balance fine-
tuning
5 Digital Filter/HDR
Capture
19 Flash Mode
6 GPS positioning status 20 Focusing area (AF point)
7 Wireless LAN status 21 Drive Mode
8 AE Metering 22 White Balance
9 Shake Reduction 23 File Format
10 Battery level 24 Memory card
11 E-dial guide 25 Image storage capacity
12 Shutter speed 26 ASTROTRACER
maximum tracking
duration
13 Aperture value
14 EV Compensation/
Exposure Bracketing
27 Operation guide
15 EV bar scale
1 2 3
11
11
11
11 12
13
16
15
14
19 21 22
27 26
19 21 20
16
22
17 18
25 2324
4 5 6 7 8 9 10
1/ 1/
250 250
1600 1600
FF
5.6 5.6
12345 12345 5 ´ 00˝ 5 ´ 00˝
+1.0 +1.0 G1A1 G1A1