3
Shooti
n
g
69
5
Press
E
.
The screen of Step 1 reappears.
6
Set the number of shots and bracket value.
Available operations
7
Press
E
.
The camera returns to standby mode.
8
Shoot.
After pictures are taken, the camera returns to standby
mode.
t
Memo
• The bracket value can be set in increments of 1/3 EV steps or
1/2 EV steps according to the [1 EV Steps] setting of the
E
1
menu.
• The following settings for Bracketing can be set in the
E
2
menu.
1
Select
c
on the Drive
Mode screen and press
B
.
2
Use
CD
to select
c
or
d
.
3
Press
E
.
The camera returns to standby mode.
4
Press
0
halfway, and then fully.
The mirror pops up and the AE Lock function is activated.
5
Press
0
fully again.
The picture is taken and then the mirror returns to its
original position.
t
Memo
• The mirror automatically returns to its original position if 1
minute elapses after the mirror pops up.
u
Caution
• While this function is used, [Shake Reduction] of the
A
4
menu is fixed to [Off].
Q
Sets the number of shots.
R
Changes the bracket value.
J
R
Adjusts the exposure
compensation value.
M
Resets the adjustment value to the
default setting.
10 Bracketing Order
Changes the shooting order of
pictures.
11 One-Push Bracketing
Takes all pictures with one
release of the shutter.
Mirror Lock-up Shooting
c
Mirror Lock-up Shooting
d
Mirror Lock-up Sh Remote Control
Mirror Lock-up Shooting
Mirror Lock-up Shooting
Cancel
Cancel
OK
OK
