Pentax K-5II Page 70 Operating Manual Download

Page: 70 / 336

asic

ions

Enlarge the subject (telephoto) or capture a wider area (wide angle) with
a zoom lens. Adjust the subject to the desired size and take pictures.

Turn the zoom ring to the right or
left.

Turn the zoom ring clockwise for
telephoto and counterclockwise for wide
angle.

• Refer to p.90 for details on using

(Green) mode.

• The beep that sounds when the image is focused can be turned off. (p.252)
• You can set the camera so that pressing the

button will focus

automatically, in the same way as pressing the shutter release button
halfway. (p.110)

• You can preview the image on the monitor and check the composition,

exposure, and focus before shooting. (p.118)

Using a Zoom Lens

Power Zoom (Auto Zoom) is available if a Power Zoom compatible FA lens is
used with this camera. (p.297)

Summary of Contents for K-5II

















































































































































































































































































































































Search results

Summary of Contents for K-5II

Reviews:

Related manuals for K-5II

Brands by name

Popular brands

Pentax K-5II, Operating Manual

Search results

Summary of Contents for K-5II

Reviews:

Related manuals for K-5II

Brands by name

Popular brands