manualshive.com logo in svg

Pentax K-5II, Operating Manual, Page: 51 / 336

Share
Download
Pentax K-5II Operating Manual Download Page 51

49

Gettin

g

 Sta

rte

d

2

Inserting the Battery

Insert the battery into the camera. Use only a D-LI90 battery.

When using the battery for the first time, or when the battery has not been 
used in a long time, or when [Battery depleted] appears, recharge the 
battery.

Note: AC plug cord “Listed, Type SPT-2 or NISPT-2, 18/2 flexible 
cord, rated 125 V, 7A, minimum 6ft (1.8m)”

1

Connect the AC plug cord to the battery charger.

2

Plug the AC plug cord into the power outlet.

3

Face the 

2

 mark on the battery up and insert it into the 

battery charger.

The indicator lamp is lit during charging and turns off when the battery is 
fully charged.

4

When the battery is fully charged, remove the battery from 
the battery charger.

Charging the Battery

Lithium-ion battery

Battery charger

Indicator lamp

AC plug cord

3

1

2

Summary of Contents for K-5II

















































































































































































































































































































































Reviews:

No comments