manualshive.com logo in svg

Pentax K-5II, Operating Manual

Share
Download
Pentax K-5II Operating Manual Download Page 248

246

9

Chang

ing A

d

ditio

n

al Setting

s

Formatting the SD Memory Card

Use this camera to format (initialize) an SD Memory Card that is unused 
or has been used on other cameras or digital devices.
Formatting deletes all the data saved on the SD Memory Card.

1

Select [Format] in the [

R

 Set-up 4] menu and press the 

four-way controller (

5

).

The [Format] screen appears.

2

Press the four-way controller (

2

) 

to select [Format].

3

Press the 

4

 button.

Formatting starts.
When formatting is completed, the screen that was displayed before 
selecting the menu appears again.

• Do not remove the SD Memory Card while formatting. The card may be 

damaged and become unusable.

• Formatting deletes all data, both protected and unprotected. Be aware.

When an SD Memory Card is formatted, the volume label assigned to the card 
is “K-5 II”. When this camera is connected to a computer, the SD Memory Card 
is recognized as a removable disk with the name “K-5 II”. (p.280)

Format

Cancel

Format

All data will be deleted

OK

OK

Summary of Contents for K-5II

















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands