111
Sho
o
ting
Func
tion
s
4
6
Press the
=
button while
looking through the viewfinder.
Autofocus is performed.
7
Press the shutter release button.
When [Enable AF] is assigned to [Shutter Button Half Press] in [Button
Customization], press the shutter release button while holding down the
=
button.
The picture is taken.
You can adjust the AF focusing position.
1
Select [26. AF Fine Adjustment] in the [
A
Custom Setting
4] menu and press the four-way controller (
5
).
2
Use the four-way controller (
23
) to select [On] and press
the four-way controller (
5
).
The [26. AF Fine Adjustment] screen appears.
l
Single mode
When the
=
button is pressed and the subject comes
into focus, the Focus Lock function is activated while
the button is pressed.
k
Continuous mode
The subject is kept in focus while the
=
button is
pressed.
AF Fine Adjustment
• Be sure to use [AF Fine Adjustment] only when necessary. Care should
be taken as adjusting the autofocus may make it difficult to capture
images with the appropriate focus. Set to [Off] if you do not need to
adjust the AF focusing position.
• Any camera shake during test shooting may make it difficult to obtain the
accurate focusing position. Therefore, always use a tripod when taking test shots.
Summary of Contents for K-5II
