Pentax 19541 Operating Manual Download

Page: 165 / 268

163

Play

bac

Fu
nctio

Displaying Multiple Images

You can display 4, 9 or 16 images on the monitor at the same time.

The default setting is 9-image display. The number of images can be
changed but 9-image display is explained here.

Press the

button.

Turn the e-dial to the left (toward

The multi-image display screen appears.
Up to nine thumbnail images will be
displayed at once. Use the four-way
controller (

2345

) to select an image. A

scroll bar appears at the right of the screen.
With an image selected in the bottom row,
pressing the four-way controller (

)

displays the next nine images.
[?] appears for an image that cannot be
displayed.

100-0046

1/2000

1/2000
F5.6

F5.6

1/2000
F5.6

100-0046

S e l e c t & D e l e t e

Scroll bar

Frame

Summary of Contents for 19541













































































































































































































































































Search results

Summary of Contents for 19541

Reviews:

Related manuals for 19541

Brands by name

Popular brands

Pentax 19541, Operating Manual

Search results

Summary of Contents for 19541

Reviews:

Related manuals for 19541

Brands by name

Popular brands