Pentax 19541 Operating Manual Download

Page: 156 / 268

154

Sho

ting

Setti

ngs

Press the

button.

The camera is ready to take a picture with the set White Balance.

You can fine tune the White Balance setting.

Set [7. Adjust White Balance] in the [

Custom Setting]

menu to [On].

Perform desired settings in Steps 1 to 3 of “Setting the
White Balance”.

Press the four-way controller (

The [Adjust White Balance] screen appears.

Use the four-way controller
(

2345

) to fine tune White

Balance.

Seven levels and 225 patterns are
available on the G-M and B-A axes.

Press the Green button to reset the GM compensation and BA
compensation to [0].

• No image is recorded when the shutter release button is pressed to adjust

the white balance.

• [NG] appears when measuring is unsuccessful. Press the

button while

displayed to return to the [Adjust White Balance] screen for remeasuring.

• If the picture is extremely overexposed or underexposed, white balance may

not be adjusted. In this case, adjust appropriate exposure and adjust the

white balance.

Fine-Tuning the White Balance

GM compensation

Adjusts the tone of the colors between green
and magenta.

BA compensation

Adjusts the tone of the colors between blue
and amber.

± 0

G 1

MENU

O K

C a n c e l

S h a d e

Summary of Contents for 19541













































































































































































































































































Search results

Summary of Contents for 19541

Reviews:

Related manuals for 19541

Brands by name

Popular brands

Pentax 19541, Operating Manual

Search results

Summary of Contents for 19541

Reviews:

Related manuals for 19541

Brands by name

Popular brands